Shreeji Enterprise

Type: Incremental rotary encoder

Resolution: 100 pulses per revolution (PPR)

Shaft Type: Solid shaft, 6 mm diameter

Body Diameter: 38 mm

Output Type: Totem-pole (Push-pull / HTL)

Power Supply: 12–24 V DC

Max Response Frequency: 200 kHz

Maximum Rotation Speed: 5000 RPM

Operating Temperature: –10 °C to +70 °C

Protection Rating: IP50

Connection: 1-meter shielded cable

Material: Metal housing with plastic cover

Weight: Approx. 160 grams

Mounting: Servo or clamp flange

Shock Resistance: 490 m/s² (11 ms, 3 times each axis)

Vibration Resistance: 10–55 Hz, 1.5 mm double amplitude

Model: TRD-MA512P

Type: Absolute rotary encoder (Gray code)

Shaft Type: 6 mm solid shaft

Resolution: 512 pulses per revolution (PPR)

Output Type: PNP open collector

Supply Voltage: 10–26 V DC

Output Signal: Gray code absolute position feedback

Ingress Protection: IP50 (dustproof)

Operating Temperature: –10°C to +70°C

Housing Diameter: 38 mm

Mounting: Flange mount with M3 screws

Weight: Approximately 0.3 kg

Model: E50S8‑1024‑3‑T‑1

Type: Shaft-type incremental rotary encoder (Ø50 mm housing)

Shaft Diameter: Ø8 mm

Resolution: 1024 pulses per revolution (PPR)

Phases: A, B, and Z channels with totem-pole (push-pull) outputs

Supply Voltage: 5–24 V DC

Max Response Frequency: 300 kHz

Max Rotational Speed: 5000 RPM

Starting Torque: ≤ 70 gf·cm (~0.0069 N·m)

Output Current (Totem-Pole): Low: ≤ 30 mA (≤ 0.4 V residual); High: ≤ 10 mA, voltage drop up to ~3 V

Response Time: ≤ 1 μs (rise/fall with load)

Product Type: Siemens SINAMICS Incremental Encoder Cable

Part Number: 6FX2001-5QD13-0AA1

Cable Length: 13 meters

Cable Type: Pre-assembled encoder cable with connectors

Connector 1: Straight connector for encoder (M23, 12-pin)

Connector 2: Open cable end (for free wiring or terminal block connection)

Application: For SINAMICS S120 drive system and Heidenhain/Siemens encoders

Shielded Cable: Yes, with high interference protection

Temperature Range: Suitable for industrial environments

Typical Use: Feedback signal transmission between encoder and drive controller

Compatibility: Works with Siemens motor encoders and SINAMICS/SIMOTICS systems

Product Type: Siemens Incremental Encoder Cable (pre-assembled)

Part Number: 6FX2001-2CC50

Cable Length: 50 meters

Cable Type: Signal cable for encoder feedback

Connector Type:

• One end: M23 circular connector (male or female, model dependent)

• Other end: Open cable end or specific drive connector

Usage: For connection between encoder and SINAMICS or SIMODRIVE systems

Shielded: Yes – EMC-compliant for industrial environments

Signal Type: Typically for TTL, HTL, or SIN/COS encoder signals

Core Cross-Section: Typically 0.14–0.5 mm² depending on version

Temperature Range: -20°C to +80°C (fixed); -10°C to +70°C (flexing)

Application: Industrial automation, servo motor feedback, CNC systems

Type: Incremental rotary encoder

Resolution: 1000 pulses per revolution (PPR)

Output Signal: A, B, Z (quadrature with index)

Output Type: Totem-pole (push-pull)

Shaft Type: Solid shaft, 6 mm diameter

Body Size: 38 mm diameter

Supply Voltage: 12–24 V DC

Max Response Frequency: 200 kHz

Max Speed: 5000 RPM

Protection Rating: IP50

Connection: 1-meter shielded cable

Operating Temperature: –10 °C to +70 °C

Weight: Approx. 160 grams

Typical Use: Position/speed feedback in automation systems