Shreeji Enterprise

Features:

• Input Voltage: 100-240 VAC.
• Ingress Protection Rating: IP67.
• Back Ingress Protection Rating: IP20.
• Color Display: Yes.
• Resolution: 640 x 480.
• Screen Size: 10.4".
• Screen Type: TFT.
• Internal Memory Capacity: 6 MB.
• Type of Keyboard: Touch Screen.
• Screen Orientation: Landscape.

• Do not attempt to install, operate, maintain or inspect the equipment until you have read through this
• Instruction Manual and appended documents carefully and can use the equipment correctly. Do not use the
• equipment until you have a full knowledge of the equipment, safety information and instructions.
• In this Instruction Manual, the safety instruction levels are classified into "WARNING" and "CAUTION .
• Transport the products correctly according to their mass.
• Use the eyebolt of the servo motor for the transportation purpose only. Do not use the eyebolts to
• transport the servo motor when it is mounted on a machine.
• Do not overtighten the eyebolts of the servo motor. Tightening too hard may damage the tap.
• Stacking in excess of the specified number of product packages is not allowed.
• Do not hold the cables, connectors, shaft, or encoder when carrying the servo motor. Otherwise, it may
• drop.
• Install the servo motor in a load-bearing place in accordance with the Instruction Manual.
• Do not get on or put heavy load on the equipment. Otherwise, it may cause injury.
• The equipment must be installed in the specified direction.
• Do not install or operate the servo motor which have been damaged or have any parts missing.
• Do not block intake and exhaust areas of the servo motor with a cooling fan. Otherwise, it may cause a
• malfunction.
• Do not drop or strike the servo motor. Otherwise, injury, malfunction, etc. may occur.
• Securely fix the servo motor to the machine. If being attached insecurely, the servo motor may come off
• during operation.
• The geared servo motor must be installed in the specified direction to prevent oil leakage.
• When handling the servo motor, be careful with the sharp edges of the servo motor, shaft keyway, or
• others.
• Do not strike the connector. Otherwise, a connection failure, malfunction, etc. may occur.
• Be sure to measure the motor vibration level with the servo motor mounted to the machine when
• checking the vibration level. A great vibration may cause the early damage of a bearing, encoder, brake,
• and gear reducer. The great vibration may also cause the poor connector connection or bolt looseness.
• For the gain adjustment at the equipment startup, check the torque waveform and the speed waveform
• with a measurement device, and then check that no vibration occurs. If the vibration occurs due to high
• gain, the vibration may cause the early damage of the servo motor.
• Take safety measures, e.g. provide covers, to prevent accidental access to the rotor of the servo motor
• during operation.
• Never hit the servo motor or shaft, especially when coupling the servo motor to the machine. Otherwise,
• the encoder may malfunction.
• Do not subject the servo motor shaft to more than the permissible load. Otherwise, the shaft may break.
• To prevent a fire or injury from occurring in case of an earthquake or other natural disasters, securely
• install, mount, and wire the servo motor in accordance with the Instruction Manual. 

• General-purpose AC servo amplifier providing 400 W output power for industrial motor control applications 

• Accepts 3-phase 200–230 VAC (or single-phase 230 VAC) at 50/60 Hz, with max current around 5.8 A 

• Features a self-cooled (open IP00) design, 5‑digit LED status display, built-in protective functions and regenerative options

Established in Year 2018 Shreeji Enterprise The Leading Wholesaler, Trader and Distributor of Thyristor Module, Proximity Sensor, Delta AC Motor Drives and Many More