Shreeji Enterprise

• Model: EE‑SX770A (pre-wired 2 m cable)

• Type: Slot-type through-beam photomicrosensor

• Slot Width: 5 mm

• Output Type: NPN open-collector, Dark‑ON mode (output active when beam is interrupted)

• Supply Voltage: 5 – 24 V DC (±10%, ≤10 % ripple)

• Current Consumption: Max 12 mA

• Up to 100 mA @ 5–24 V, residual voltage ≤0.8 V

 

• Up to 40 mA for TTL-level, residual ≤0.4 V

• Model: IFM PK6521

• Type: Electronic pressure switch with rotary adjustment for switch points

• Measuring Range: 0 to 250 bar (0 to 3625 psi)

• Process Connection: G 1/4" threaded connection

• Outputs: Two PNP switching outputs, independently configurable

• Power Supply: 9.6 to 32 V DC

• Output Load: Max 500 mA per output

• Switching Frequency: Up to 100 Hz

• Accuracy: ±2.5% of span

• Repeatability: ±0.5%

• Long-Term Stability: Designed for >50 million pressure cycles

• Max Pressure: Up to 400 bar (working), burst pressure ~1000 bar

• Operating Temperature: –25 °C to +80 °C

• Protection Rating: IP67

• Protection Features: Short-circuit, reverse polarity, overload protection

• Display: LED indicators for switch status and power

• Housing Material: Stainless steel sensor cell

• Weight: Approximately 95 g

• Type: Remote Seal Pressure Transmitter

• Function: Measures pressure without exposing the transmitter to direct process fluid

• Design: Uses a diaphragm seal connected via capillary tubing

• Sealing System:

  • Capillary filled with silicone or inert fluid

  • Seals isolate the pressure sensor from high temperature, corrosive, or viscous media

• Measurement Types:

  • Gauge Pressure (GP)

  • Absolute Pressure (AP)

  • Differential Pressure (DP)

• Output Signal: 4–20 mA with HART® protocol (standard)

• Accuracy: Typically ±0.035% to ±0.075% of span

• Turn Down Ratio: Up to 100:1

• Response Time: Approx. 90–150 ms (depends on model and capillary length)

• Long-Term Stability: Up to ±0.01% of URL per year

Pressure range: Configurable from 0.3 psi to 10,000 psi (up to ~20,000 psig/1378 bar), for gauge or absolute measurements depending on model (e.g. 3051TG for gauge, 3051TA for absolute)

• Series: SITRANS P200, P210, P220, P Compact, P320, P420

• Output type: Analog (4–20 mA) or Digital (HART, PROFIBUS, Foundation Fieldbus)

• Measuring types: Gauge, absolute, differential, and level pressure

• Accuracy: Up to 0.04% of full scale (P420)

• Pressure range: From mbar up to 700+ bar

• Response time: As fast as 105 ms

• Certifications: SIL 2/3 for safety applications

• Diagnostics: Supports NAMUR NE107 alarms

• Long-term stability: ≤ 0.125% over 5 years

• Construction: Stainless steel body, optional ceramic, Monel, Hastelloy, or gold diaphragms

• IP rating: Models available with IP66/IP68 protection

• Applications: Process automation, oil & gas, water treatment, food & pharma, energy sector

• Display option: Available with integrated digital display (in some models)

• Communication: Configurable via SIMATIC PDM software or handheld communicator

• Product Code: IS5035

• Sensor Type: Inductive proximity sensor

• Mounting Style: Flush mountable

• Housing Type: Rectangular plastic housing

• Sensing Distance: 2 mm

• Operating Distance: 0 to 1.6 mm

• Output Configuration: PNP, normally open

• Wiring: 3-wire DC

• Output Current Rating: Max 200 mA

• Supply Voltage: 10–36 V DC

• Switching Frequency: Up to 800 Hz

• Short-Circuit Protection: Yes

• Overload Protection: Yes

• LED Indicator: Yellow LED for switching status

• Connection Type: M8 connector, 3-pin

• Housing Material: PBT plastic

• Operating Temperature: –25 °C to +80 °C

• Protection Rating: IP65 / IP67

• Switching Accuracy: ±10% of sensing range

• Shock/Vibration Resistance: Standard industrial-grade

• Typical Applications: Detection of metal objects in confined spaces

• Converts pressure into a digital signal

• Communicates via HART, Modbus, RS‑485, IO-Link, etc.

• Built-in microprocessor for signal processing and temperature compensation

• High accuracy and long-term stability

• Supports remote configuration and diagnostics

• Can measure gauge, absolute, or differential pressure

• Common ranges: vacuum to 400+ bar

• Output: digital only or hybrid (digital + analog)

• Compatible with PLC, DCS, and SCADA systems

• Applications: process automation, water treatment, HVAC, oil & gas, pharma

• Often includes LCD/LED display for local reading

• Compact, robust design with IP65–IP69K protection options

• Model: A06B‑6079‑H206

• Type: Single-axis digital servo amplifier

• Series: FANUC Beta Series (SVU‑10)

• Input Voltage: 200–240 VAC, 50/60 Hz (accepts single or three-phase)

• Continuous Output Current: Approximately 10 A

• Control Interface: Fiber-optic link (FSSB protocol) to FANUC CNC system

• Cooling: Internal fan-cooled unit

• Model: STD810 (SmartLine ST800 Series)

• Type: Differential Pressure Transmitter

• Pressure Range: ±10 inH₂O to ±1000 psi (varies by calibration)

• Output Signal: 4–20 mA with HART® communication

• Accuracy: ±0.035% of span (standard); ±0.025% (optional)

• Response Time: As fast as 90 ms

• Turn Down Ratio: Up to 100:1

• Stability: 0.01% of URL per year for 10 years

• Process Connection: 1/4"–18 NPT female or manifold mount

• Display: Optional LCD display with configuration buttons

3051CD2A22A1M5T1

402 different pressure transmitter

Established in Year 2018 Shreeji Enterprise The Leading Wholesaler, Trader and Distributor of Thyristor Module, Proximity Sensor, Delta AC Motor Drives and Many More

• Model: EE‑SX673

• Type: Slot-type (through-beam) photomicrosensor

• Slot Width / Sensing Distance: 5 mm

• Output: NPN open-collector, selectable Light‑ON or Dark‑ON

• Supply Voltage: 5–24 V DC ±10%

• Current Consumption: Approx. 12 mA

• Output Load Capacity: Up to 100 mA

  • Residual voltage ≤0.8 V @100 mA, ≤0.4 V @40 mA

 

• Response Frequency: ≥1 kHz (typical ~3 kHz)

• Model: EE‑SX770 (pre-wired, 2 m slim cable)

• Type: Slot-type (through-beam) photomicrosensor

• Slot Width (Sensing Distance): 5 mm

• Output Type: NPN open-collector (Dark‑ON)

• Supply Voltage: 5–24 V DC (±10% ripple ≤ 10%)

• Load Current: Up to 100 mA

   

  • Residual Voltage: ≤ 0.8 V @100 mA; ≤ 0.4 V @40 mA